E/One Sentry Protect Plus Alarm Panel—for Duplex Grinder Pump Stations
E/One Sewer Systems has added Protect Plus for duplex grinder pump stations to its Sentry alarm panel offerings, further enhancing the strongest panel line in the category.
E/One Sentry alarm panels are UL-listed and include lockable, NEMA 4X-rated enclosures. From basic monitoring to advanced warning of pending service needs, E/One Sentry panels are customizable and designed for use with simplex and duplex Extreme Series grinder pump stations.
The Protect Plus panel’s dead front includes a membrane switch with LED indictors and an LCD message display. The Protect Plus option provides protection from low voltage (brownout), run dry and high system pressure situations. With each condition, a lockout cycle will prevent the motor from operating, the Trouble LED will illuminate and the LCD will display the lockout message.
Features exclusive to Protect Plus include: high/low voltage monitoring; high/low wattage monitoring; extended run time; cycle/event counter; adjustable run time limit; adjustable power-up and alarm delays; and system self-test.
Available options include generator receptacle with manual transfer; main service disconnect; E/One’s Remote Sentry (indoor alarm module); and an external auto-dialer.
- Corrosion-proof fiberglass enclosure
- NEMA 4X rated enclosure
- Lockable latch with padlock
- Predictive status display module
- Pre-alarm indication for major operating parameters
- Alarm indications for major operating parameters
- Hour meter, cycle counter and alarm delay
- LCD display and user-friendly interface
- Inner cover (dead front)
- Contact group — dry contacts and Remote Sentry contacts
- Programmable User Settings
NA0269P02 - Installation and Operation Manual For Duplex Hardwired Pumps (PDF)
NA0269P12 - Installation and Operation Manual for Duplex Wireless Pumps (PDF)
* Note: This manual applies to panels configured with printed circuit board assembly P/N NB0189Gxx, with an approximate manufacture date of 10/2011 or later. If unsure of the configuration of your panel, contact E/One factory for assistance.